Izdelki za oprema za rešitve (3)

A drum-type speed regulator made of medical polyethylene is used for more precise speed regulation, it has two scales: 0 to 250 ml/h for solutions with low viscosity (0.9% NaCL, 5% glucose and others); 0 to 200 ml/h for high viscosity solutions (20% glucose); 10. elastic adapter between the tube and the injection needle for additional introduction of the drug; Shelf life 3 years from the date of manufacture, as indicated on the packaging; Sterile, non-pyrogenic and non-toxic; Individual packaging. Instructions for use: 1. open the individual package, close the flow regulators, remove the protective cap from the needle, insert the needle into the cap of the infusion solution bottle; 2. Wait until the infusion solution fills 2/3 of the volume of the drip reservoir. 3; 3. open the flow regulators and release the air from the flexible pipe, the system is now ready for use; 4. Adjust the required infusion rate as needed; 5. The rotary knob has 2 adjustment sca

Purpose: for administering infusion solutions and blood substitutes with a flow regulator. The infusion system with an extremely precise drum-type flow regulator allows precise regulation of the flow rate and infusion of solutions into the patient's circulatory system with an adjustable (defined) infusion rate. Technical specifications: 1. The length of the pipe must not be less than 1500 mm; the diameter must not be less than 3.5 mm; 2. it is made of polyvinyl chloride; 3. The air duct, consisting of a metal needle and an air filter, is made of metal and polypropylene; 4. Filter to prevent the penetration of unwanted particles; 5. Drip chamber with filter provides visually controlled filling; 6. Connection type: Luer Slip or Luer Lock; 7. A metal atraumatic injection needle with a triangular blade, coated with silicone for ease of insertion, with a size of at least 0.8*38 mm (available with and witout a needle . There is a roller regulator for the flow rate.

For intravenous infusion of infusion solutions Specifications: 1. The tube is made of polyvinyl chloride; 2. a triangularly sharpened atraumatic needle of medical-grade steel with silicon coating for easy insertion; 3.The air duct consists of a metal needle and a polypropylene air valve. There are systems with a plastic needle (plastic needle from polypropylene for a bottle with infusion solution is combined with an air valve with a filter); 4.Drip chamber with filter to prevent the entry of unwanted particles, provides visually controlled filling; 5.Roller speed regulator; 6. an elastic adapter between the tube and the injection needle for additional drug administration; 7.Tube-to-needle connection type: Luer Lock; 8.Sterile, apirogenic, non-toxic; 9.For single use; 10.Packaging options: 25/500 11.Shelf life 3 years from the date of manufacture indicated on the package.